Heavy Equipment Operator Course that You Must Learn

Heavy equipment is all kinds of devices/aircraft including attachment & implementation (self-propelled) or drawn (towed-type) as well as stationary (towed-type) and has power over a kilo-watt, which is used for performing mining, general industry, agriculture/forestry and/or other fields of work, as long as it is not a direct processing tool.

In the process of operation of large amounts of equipment and services, from the skills and skills of the operator, the tool-operating procedures, the occupational safety aspect (K3) and the intensive care and trouble areas.

This heavy equipment is a high-risk technical instrument that can cause accidents in work where they are not handled properly.

More clearly you could listen to the subject of the following heavy equipment operator course.

Heavy Equipment Understanding

Heavy equipment is an instrument used to assist humans in the construction of a building structure.

Heavy equipment was an important factor in projects, especially construction projects as well as in large-scale mining and other activities.

Related: Heavy Equipment in Construction

The purpose of the use of tools-such a weight tool is to make it easier for humans to do their work, thus achieving the desired results in a relatively shorter period of time.

1. Tiller

The land conditions of the project are sometimes still the original land to be prepared for processing.

If the site still had shrubs or trees, then opening could be done with dozer.

For the removal of the topmost soil can be used scraper. As for building a flat surface instead of dozer, we could also use a grader motor.

Bulldozers can be bulldozed into two that involves using a crawler tractor dozer and a bulldozer that USES a rubber wheel (wheel tractor dozer).

Basically, the bulldozers use the tractor as the main driver seat, but it is usually equipped with an Angle so that it can serve asa bulldozer that can dislodge the ground.

A bulldozer is used as a drive of soil both forward and sideways, depending on the axis of its vehicle.

The work in the swamp used a special kind of bulldozer called the swamp bulldozer.

2. Digger’s Tool

The kind of device is known as an excavator. Some heavy tools are used to excavate soil and rocks. Included in this category are the front steam, backhoe, dragline, and clamshell.

3. Materials Transporter

Cranks fall under the category of haul materials, since these can haul material on vertical and then move it horizontally on the relatively small region.

For the removal of material from relatively far distances, the equipment could be used as a belt, truck and wagon.

These tools require another tool that helps load the material into them.

4. Moving Materials

Included in this category are tools that are not usually used as transport tools but are used to transfer materials from one tool to another. Loader and dozer are moving materials.

5. The Compactor

Mechanically demolition is generally done by roller driving; The classification of known roller is among other things

by the way it moves; Some of them move themselves, but they do the one with the tractor.

  • Some are made of steel (steel wheel) and some are made of rubber.
  • From the surface of the wheel; Some have smooth surfaces, segments, grids, sheep feet, and so forth.
  • Judging by the arrangement of the mill; Some with three-wheel, two-wheel, and three axle tandem roller. A vibrator that USES a vibrator.

5. Materials Processing Tool

This device is used to convert rock and natural minerals into a desired shape and size.

The results of these tools are, for example, molten rock, concrete, and asphalt.

Crusher and concrete mixer truck are included. Devices that mixing the materials on top are also categorized in materials processing tools such as concrete batch plant and mixing plant.

6. Materials Finishing Device

The device falls into this category because its function is to place the material where it is assigned.

At or near this location the materials are distributed evenly and compacted according to specified specifications.

Concrete spreader, concrete paver, grader bike, and composers are the concrete spreader.

Type of course for heavy equipment operators of heavy equipment operators of course as described above.

Heavy equipment operators are needed in both the mining and construction operations.

The ability to operate heavy equipment is useful for nickel mining, land opening and construction.

Training that emphasizes practice and certification gives you great opportunities at work.

Related: Heavy Equipment Mechanic Description

Here Are the Most Wanted heavy Equipment Operator Course

You can see kind of heavy equipment courses, you must to know, are:

1. Excavator Operator

Heavy Equipment Operator Course

Training that stressed the practice of becoming proficient in the operation of tools.

Theoretical materials were also provided along with instrument observation.

Participants are given compulsory knowledge on maintenance, job security, job reports and simulation training.

Training methods are indoor for practice materials and outdoor for direct operating practices.

The kind of weight over cat301, cat302 and Hitachi ps100, depending on your suitability.

Materials given in practice exercises include dumping, ditching, shipping, loading, and traveling.

The purpose of the material was to enable the heavy tool operator to feel comfortable and confident at work.

Graduates in this training have certificates issued by the labor service.

2. Dump Truck Operator

Heavy Equipment Operator Course

Dump trucks aren’t just used to transport construction materials, but heavy equipment.

This exercise is meant to enable you to have an official dump truck operating capability.

Any competent operator will minimize work accidents. The training materials contain knowledge of the underlying forces of movers, devices, safety factors and daily care.

Theoretical material contains the introduction of the component unit and the function of control and the introduction of the components.

It included the removal of the dump truck movement and use procedures. In the course of heavy equipment, you are at least a SLTP graduate and have one year’s experience in the field.

Facilities provided are practical units, hand-out, and classrooms.

3. Crane Operator

Heavy Equipment Operator Course

In this course, participants select the desired crane of their own kind. The class in this training is divided into three classes based on crane lifting capacity.

The training is primarily for obtaining the operator’s license certificate. In-training materials include operation, terminology tap type and security knowledge.

Related: 17 Heavy Equipment Transport Companies

The purpose of this course is that you are expected to be able to minimize job accidents and evaluate potential dangers.

The training methods form explanations of concepts, questioners, practices and tests. You qualify at least a junior high school and one-year experience in the field of crane.

Teaching power comes from the labor and transmigration departments.

4. Bulldozer Operator

Heavy Equipment Operator Course

The heavy-duty operators are useful in extracting, eviction and material pushing. Trainees are trained to operate bulldozers in the muddy, rocky and forestry areas.

The training’s meant to be a bulldozer unit operator. Training is also designed to realize efficient, highly productive, and competent operators.

The trainee will receive from the ministry of labor and transport, certificate of the operator’s permission (sio).

Training materials include elementary knowledge of the bulldozer, propulsion and hydraulic materials, treatment and tool inspection.

For practice materials includes the introduction of units and operation. As for the requirements, you are required to be at least nineteen years old and not color-blind.

5. Wheel Loader Operator

Heavy Equipment Operator Course

The training includes all the operations of the wheel loader. This training links such to treatment and checking before going into operation.

K3 factors and policies are also taught in this training. The theoretical matter contains the unit’s identification, which is the instrument control function panel.

For the operation of the unit contains the basic technique, procedure and function of the component wheel loader.

In practice includes the introduction of component units and the operation of machine units.

The results of training are intended to make you a participant with those tool-mastery skills.

Under the terms, you’re at least nineteen. The rest of the requirements are to be physically and color-blind. The facility consists of self-protective devices (apd) and other backups.


Heavy equipment is an instrument used to assist humans in the construction of a building structure.

Heavy equipment was an important factor in projects, especially construction projects as well as in large-scale mining and other activities.

And to operate heavy equipment of course other than skill also required training and heavy equipment operators of course like explanations on top.

Tinggalkan komentar